研究成果

年份
论文题目
刊物
2010
The influence of composition segregation to the microstructure and mechanical properties of SA508-3 steel
Advanced Materials Research Vols
2010
Anisotropy in electronic, optical, and mechanical properties of superhard body-centered tetragonal C4 phase of carbon
APPL PHYS LETT
2010
Impact toughness analysis of weld metal and heat-affected zone for low alloy carbon steel multi-pass welded joint
CHINA WELDING
2010
Study on macrosegregation in heavy steel ingots
INT J CAST METAL RES
2010
Numerical simulation of macrosegregation in a large multi-concentration poured steel ingot
INT J CAST METAL RES
2010
Effects of normalizing process on the microstructure evolution and mechanical properties of low carbon steel weld metal with niobium addition
ISIJ INT
2010
Phase-field modeling of the initial transient in directional solidification of Al - 4 wt% Cu alloy
ISIJ Int
2010
A novel technique for reducing the macrosegregation in heavy steel ingot
J MATER PROCESS TECH
2010
Effect of solidification rate on the morphology and distribution of eutectic carbides in centrifugal casting high speed steel rolls
J MATER PROCESS TECH
2010
Effects of heat treatment process and niobium addition on the microstructure and mechanical properities of low carbon steel weld metal
J. MATER. SCI
2010
Investigation on the Transformation Behavior of Precipitates in a W-alloyed 10 wt pct Cr Steel for Ultra-supercritical Power Plants
J. Mater. Sci. Technol.
2010
Mechanical properties and temper resistance of deformation induced ferrite in a low carbon steel
J. Mater. Sci. Technol.
2010
Weld shape variation and electrode oxidation behavior under Ar-(Ar-CO2) double shielded GTA welding
J. Mater. Sci. Technol.
2010
Polymeric forms of carbon in dense lithium carbide
J. Phys.: Condens. Matter
2010
Modeling of the weld shape development during the autogenous welding process by coupling welding arc with weld pool
J.Mater.Eng.Perform.
2010
Three-dimensional finite element method simulation and optimization of shrink fitting process for a large marine crankshaft
Mater Design
2010
Effect of delta ferrite on impact properties of low carbon 13Cr–4Ni martensitic stainless steel
Materials Science and Engineering A
2010
A study of the carbides in high speed steel rolls
Materials Science Forum
2010
Numerical Simulation of Deformation during Hot Procedure for Large Hydraulic Turbine Runner Blade
Materials Science Froum
2010
Pressure-induced behavior of the hydrogen-dominant compound SiH4(H2)2 from first-principles calculations
PHYS REV B
< 1 2 3 4 5 6 7 8 9 10 11 12 13 >

材料加工模拟研究部 Copyright© 2017 辽ICP备05005387号-9