研究成果
2022
Motion and removal behavior of inclusions in electrode tip during magnetically controlled electroslag remelting: X-ray microtomography characterization and modeling verification
Y. Guo, Z. Xia, Q. Li, M. Sun, W. Liu, S. Wang, Z. Shen, T. Zheng, B. Ding and Y. Zhong
Journal of Materials Science and Technology
2022
Effect of rare earth elements on microstructure and mechanical properties of bainite/martensite bearing steel
Z. Li, P. Liu, C.Y.Yang, X Li, Y.K.Luan, D.Z.Li
Journal of Matreials Science and Technology
2022
Influence of carbon content on the microstructure and cryogenic tensile properties of N50 austenitic stainless steel after aging treatment
R. Zhai, H. Zhang, S. Liu, M. Sun, S. Sheng and B. Xu
Journal of Nuclear Materials
2022
In situ investigation of the fracture of primary carbides and its mechanism in M50 steel
N.Y. Du, H.H. Liu, Y.F. Cao, P.X. Fu, C. Sun, H.W. Liu, D.Z. Li
Materials Characterization
2022
Thermal-strain-induced dynamic recrystallization and elements partitioning at heterogeneous bonding interfaces of titanium alloys
B. Xie, Q. Dai, Z. Yu, C. Wang, B. Xu, M. Sun and D. Li,
Materials Letters
2022
Effects of boron addition on the microstructure and creep properties of a Ni-Fe-based superalloy weld metal alloy
Wencai Xie, Dong Wu*, Shanping Lu*
Materials Research Express
2022
Residual stress and distortion in thick-plate weld joint of AF1410 steel: finite element simulations and experimental studies
Kaiyuan Zhang, Wenchao Dong*, Shanping Lu*
Materials Research Express
2022
Role of Si content on microstructural and mechanical responses of 16Cr-25Ni superaustenitic stainless steel weld metals
Wenbin Tian, Shitong Wei, Dong Wu, Jian Sun, Wenchao Dong, Shanping Lu*
Materials Science and Engineering A
2022
Influence of chromium content on the bainite transformation nucleation mechanism and the properties of 800MPa grade low carbon bainite weld deposited metal
Jingwu Liu, Jian Sun, Shitong Wei, Shanping Lu*
Materials Science and Engineering A
2022
Bainite nucleation mechanism and mechanical properties in low carbon bainite deposited metals with different nickel additions
Jingwu Liu, Shitong Wei, Shanping Lu*
Materials Science and Engineering A
2022
Simultaneously enhancing strength and toughness of medium-carbon martensitic steel via nano precipitates and fine-grained structure
H.H. Liu, P.X. Fu, H.W. Liu, C. Sun, N.Y. Du, D.Z. Li.
Materials Science and Engineering: A
2022
Influence of cooling rate during cryogenic treatment on the hierarchical microstructure and mechanical properties of M54 secondary hardening steel
H. Zhang, G. Zhang, H. Zhou, Z. Liu, B. Xu, L. Hao, M. Sun and D. Li
Materials Science and Engineering: A
2022
Effect of tempering temperature on the microstructure evolution and properties of 800MPa grade low carbon bainite deposited metals
Jingwu Liu, Jian Sun, Shitong Wei, Shanping Lu*
Metallurgical and Materials Transactions A
2022
On the mechanism of steel homogenization via Rare Earth addition: Experimental characterization and numerical simulation
Y. Cao, Y. Miao, D. Li, Y. Chen, P. Fu, H. Liu, X. Kang, H. Liu, C. Sun
Metallurgical and Materials Transactions B
2022
Modeling of macrosegregation formation and the effect of enhanced cooling during vacuum arc remelting solidification of NbTi alloy ingot
J. Guan, Y. Miao, Z. Chen, D. Liu, Y. Cao, D. Li
Metallurgical and Materials Transactions B
2022
Precipitation Behavior of Carbides and Its Effect on the Microstructure and Mechanical Properties of 15CrNi3MoV Steel
X. Yao, J. Huang, Y. Qiao, M. Sun, B. Wang and B. Xu
Metals
2022
High-temperature deformation behavior of M50 steel
G.X. Chen, X.Y. Lu, J. Yan, H.W. Liu, B.G. Sang
Metals
2022
Low-Temperature Superplastic Deformation of Cold-Rolled Fe–5.6Mn–1.1Al–0.2C Steel
H.T. Zhang, M.H. Cai, W.J. Zhu, S.H. Sun, H.L. Yan, S.J. Yao, Y.K. Luan, S. Tang, P.D. HODGSON
Metalurgical and Materials Transactions A
2022
Low-oxygen rare earth steels
D.Z. Li, P. Wang, X.Q. Chen, P.X. Fu, Y.K. Luan, X.Q. Hu, H.W. Liu, M.Y. Sun, Y. Chen, Y.F. Cao, L.
Nature Materials
2022
Similar and dissimilar resistance spot weldability of Q&P980 and TWIP1180 steels
Shitong Wei, Yiyi Li, Shanping Lu*
Science and Technology of Welding and Joining
