研究成果

年份
论文题目
刊物
2011
合金元素对Ni-Cu耐候焊丝及接头性能的影响
现代焊接
2010
Weld pool shape variations and electrode protection in double shielded TIG welding
Advanced Materials Research
2010
Hydraulic experiments of mold filling process in horizontal centrifugal casting
Advanced Materials Research
2010
A segregative MC carbide in centrifugal casting high speed steel roll
Advanced Materials Research Vols
2010
The influence of composition segregation to the microstructure and mechanical properties of SA508-3 steel
Advanced Materials Research Vols
2010
Anisotropy in electronic, optical, and mechanical properties of superhard body-centered tetragonal C4 phase of carbon
APPL PHYS LETT
2010
Impact toughness analysis of weld metal and heat-affected zone for low alloy carbon steel multi-pass welded joint
CHINA WELDING
2010
Numerical simulation of macrosegregation in a large multi-concentration poured steel ingot
INT J CAST METAL RES
2010
Study on macrosegregation in heavy steel ingots
INT J CAST METAL RES
2010
Effects of normalizing process on the microstructure evolution and mechanical properties of low carbon steel weld metal with niobium addition
ISIJ INT
2010
Phase-field modeling of the initial transient in directional solidification of Al - 4 wt% Cu alloy
ISIJ Int
2010
A novel technique for reducing the macrosegregation in heavy steel ingot
J MATER PROCESS TECH
2010
Effect of solidification rate on the morphology and distribution of eutectic carbides in centrifugal casting high speed steel rolls
J MATER PROCESS TECH
2010
Effects of heat treatment process and niobium addition on the microstructure and mechanical properities of low carbon steel weld metal
J. MATER. SCI
2010
Mechanical properties and temper resistance of deformation induced ferrite in a low carbon steel
J. Mater. Sci. Technol.
2010
Weld shape variation and electrode oxidation behavior under Ar-(Ar-CO2) double shielded GTA welding
J. Mater. Sci. Technol.
2010
Investigation on the Transformation Behavior of Precipitates in a W-alloyed 10 wt pct Cr Steel for Ultra-supercritical Power Plants
J. Mater. Sci. Technol.
2010
Polymeric forms of carbon in dense lithium carbide
J. Phys.: Condens. Matter
2010
Modeling of the weld shape development during the autogenous welding process by coupling welding arc with weld pool
J.Mater.Eng.Perform.
2010
Three-dimensional finite element method simulation and optimization of shrink fitting process for a large marine crankshaft
Mater Design
< 1 2 3 4 5 6 7 8 9 10 11 12 13 14 >

先进钢铁材料研究部 Copyright© 2017 辽ICP备05005387号-9